AT45DQ161 Datasheet, PDF (75/81 Pages) List of Unclassifed Manufacturers – 16-Mbit DataFlash (with Extra 512-Kbits), 2.3V or 2.5V Minimum SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support

27.3 Ordering Codes (Binary Page Mode)
Ordering Code
AT45DQ161-SSHD2B-T⁽¹⁾⁽³⁾
AT45DQ161-SHD2B-T^(1)(2)(3)
AT45DQ161-MHD2B-T ⁽¹⁾⁽³⁾
Package
8S1
8S2
8MA1
Lead Finish Operating Voltage
f_SCK
NiPdAu
2.5V to 3.6V
100MHz
Device Grade
Industrial
(-40C to 85C)
AT45DQ161-SSHF2B-T⁽¹⁾⁽³⁾
AT45DQ161-MHF2B-T⁽¹⁾⁽³⁾
8S1
8MA1
NiPdAu
2.3V to 3.6V
85MHz
Industrial
(-40C to 85C)
Notes: 1. The shipping carrier suffix is not marked on the device.
2. Not recommended for new design. Use the 8S1 package option.
3. Parts ordered with suffix code ‘2B’ are shipped in tape and reel (T&R) with the page size set to
512 bytes. This option is only available for shipping in T&R (-T).
27.4 Ordering Codes (Extended Temperature Range)
Ordering Code
AT45DQ161-SSHFHB-T⁽¹⁾⁽³⁾
AT45DQ161-SHFHB-T^(1)(2)(3)
Package
8S1
8S2
Lead Finish Operating Voltage
NiPdAu
2.3V to 3.6V
f_SCK
85MHz
Device Grade
Industrial
(-40C to 105C)
AT45DQ161-SSHFHD-B⁽¹⁾⁽⁴⁾
8S1
AT45DQ161-SHFHD-T⁽¹⁾⁽⁴⁾
8S2
NiPdAu
2.3V to 3.6V
85MHz
Industrial
(-40C to 105C)
Notes: 1. The shipping carrier suffix is not marked on the device.
2. Not recommended for new design. Use the 8S1 package option.
3. Parts ordered with suffix code ‘HB’ are shipped in tape and reel (T&R) with the page size set to
512 bytes and Configuration Register Quad Enable (QE) bit7 set to '1'.
4. Parts ordered with suffix code ‘HD’ are shipped in tape and reel (T&R) with the page size set to
528 bytes and Configuration Register Quad Enable (QE) bit7 set to '1'.
8S1
8S2
8MA1
Package Type
8-lead 0.150" wide, Plastic Gull Wing Small Outline (JEDEC SOIC)
8-lead 0.208" wide, Plastic Gull Wing Small Outline (EIAJ SOIC)
8-pad (5 x 6 x 0.6mm body), Thermally Enhanced Plastic Ultra Thin Dual Flat No-lead (UDFN)
AT45DQ161 [PRELIMINARY DATASHEET] 75
8790B–DFLASH–10/2013