RFM64W Datasheet, PDF (70/75 Pages) List of Unclassifed Manufacturers – ISM TRANSCEIVER MODULE

ADVANCED COMMUNICATIONS & SENSING
7.3.4. Receiver Frequency Hop Optimized Cycle
RFM64
W
IDD
IDDR
3mA typ
RFM 64W
IDDFS
1.3mA typ.
W ait
TS RE
W ait
TS HOP
RFM64W is now
ready for data
reception
Time
Set RFM64W back in Rx mode
RFM64W is in Rx mode
On channel 1 (R1/P1/S1)
1. Set R2/P2/S2
2. Set RFM64W in FS mode, change
MCParam_Band if needed, then switch
from R1/P1/S1 to R2/P2/S2
Figure 52: Rx Hop Cycle
Note: it is also possible to move from one channel to the other one without having to switch off the receiver. This
method is faster, and overall draws more current. For timing information, please refer to TS_RE_HOP on Table 8.
Page 70 of 75
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com