RFM64W Datasheet, PDF (17/75 Pages) List of Unclassifed Manufacturers – ISM TRANSCEIVER MODULE

ADVANCED COMMUNICATIONS & SENSING
RFM 64W
Consequently, in receive mode, due to the low intermediate frequency (Low-IF) architecture of the RFM64W
the frequency should be configured so as to ensure the correct low-IF receiver baseband center frequency, IF2.
Note that from Section 3.4.4, it is recommended that IF2 be set to 100 kHz.
Page 17 of 75
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com