FX15SC-51S-0.5SV Datasheet, PDF (21/24 Pages) List of Unclassifed Manufacturers – 1mm Pitch Cable-to-Board Connectors supporting LVDS signal

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products_Fs_Xta₁tu₅s o_Sn_eth_re_ieH_sir_qose₁w_meb_msite_PR_ito_cHS_hs_Cea_arc_bh_la_et_-w_toww_-B.hi_oro_ase_r-_dco_Cnn_oec_nto_nr_es.c_co_tm_o,_ro_sr c_so_unt_pac_pt _oyo_ru_tr_inH_giro_Lse_Vs_Dale_Ss r_se_ip_gre_ns_aen_ltative.
[ Coutions for ground plate assembly ]
Precautions and recommendations
1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process.
2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers.
Ground plate
(FX15S-41P-GND)
A
Pinch from top and bottom with fingers
A
qAssembly
wHorizontally
from the top
ePinch with fingers
3. Check the six fitting points after assembly and make sure that they are all correctly fitted together.
Fitting
Fitting
Fitting
Fitting
A
Fitting
Fitting
How to check fitting points
(Cut section of fitting points)
Ground plate hooks the
protrusion of connector housing
Ground plate does not hook the
protrusion of connector housing
OK
NG
[ Soldering to ground plate ]
1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and
robustness against cable stroke to up and down direction.
Soldering
Soldering
A
B293