English
Language : 

FX15SC-51S-0.5SV Datasheet, PDF (10/24 Pages) List of Unclassifed Manufacturers – 1mm Pitch Cable-to-Board Connectors supporting LVDS signal
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHFS Xpr1od5ucStserhiaevesbqee1nmdismconPtiintucedh, oCr awibll lbee-dtiosc-oBntoinauerddsoCono.nPlneaesce tcohercsk tsheupprpodourcttisnsgtatLusVoDn tShesHiirgonseawlebsite RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
qRight angle with shields – enhanced shielding (FX15S-**S-0.5SH)
No.2
No.1
0.5±0.1
0.2±0.05
A±0.2
4
No.n
(4) No.n-1
Polarizing mark
indicator
B±0.2
C±0.15
P=1±0.1
P=1±0.1
D±0.15
E±0.3
Part number
HRS No. Number of contacts A
FX15S-31S-0.5SH CL575-2306-5
31
15
FX15S-41S-0.5SH CL575-2307-8
41
20
FX15S-51S-0.5SH CL575-2303-7
51
25
J
18
23
28
B
C
27.4 14
32.4 19
37.4 24
D
E
F
G
H
15 27.8 28.8 24.8 21.6
20 32.8 33.8 29.8 26.6
25 37.8 38.8 34.8 31.6
K
L
M
N
P
R
S RoHS
15 ------ ------ 13.2 16.8 24.8 40
20 5.2 8.8 18.2 21.8 29.8 45 YES
25 5.2 8.8 23.2 26.8 34.8 50
BRecommended PCB mounting pattern and metal mask dimensions
0.5±0.03
F+00.05
G
0
-0.05
H+00.05
J
0
-0.05
K±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
L -00.05
M
+0.05
0
N23.2
0
-0.05
P26.8+00.05
3R
2S
Note 1 : The coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads.
2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock
operation.
3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film.
4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment.
5 : Vacuum pick-up area
6 : Packaged on tape-and-reel, 1000 pieces per reel.
7 : Dimensions in parenthesis ( ) are reference dimensions.
B282