English
Language : 

SI5022 Datasheet, PDF (18/22 Pages) List of Unclassifed Manufacturers – MULTI-RATE SONET/SDH CDR IC WITH LIMITING AMP
Si5022/Si5023
Pin #
7
8
9
10
11,14,18,21,
25
12,13
15
16,17
Table 9. Si5022/23 Pin Descriptions (Continued)
Pin Name
LOL
LTR
LOS
DSQLCH
VDD
DIN+,
DIN–
TDI
DOUT+,
DOUT–
I/O Signal Level
Description
O
LVTTL Loss-of-Lock.
This output is driven low when the recovered clock
frequency deviates from the reference clock by the
amount specified in Table 4 on page 9. If no exter-
nal reference is supplied, this signal will be active
when the internal PLL is no longer locked to the
incoming data.
I
LVTTL Lock-to-Reference.
When this pin is low, the DSPLL will disregard the
data inputs. If an external reference is supplied, the
output clock will be locked to the supplied refer-
ence. If no external reference is used, the DSPLL
will lock the control loop until LTR is released.
Note: This input has a weak internal pull-up.
O
LVTTL Loss-of-Signal.
This output pin is driven low when the input signal is
below the threshold set via LOS_LVL. The LOS
state will nominally have 3 dB of hysteresis relative
to the level set on LOS_LVL. (LOS operation is
guaranteed only when ac coupling is used on the
clock input.)
LVTTL Data Squelch.
When driven high, this pin forces the data present
on DOUT to zero. For normal operation, this pin
should be low. DSQLCH can be used during LOS/
LOL conditions to prevent random data from being
presented to the system.
Note: This input has a weak internal pull-down.
2.5 V or
3.3 V
Supply Voltage.
Nominally 2.5 V for Si5022 and 3.3 V for Si5023.
I
See Table 2 Differential Data Input.
Clock and data are recovered from the differential
signal present on these pins. ac coupling is recom-
mended.
I
LVTTL Production Test Input.
This pin is used during production testing and must
be tied to GND for normal operation.
O
CML
Differential Data Output.
The data output signal is a retimed version of the
data recovered from the signal present on DIN. It is
phase aligned with CLKOUT and is updated on the
rising edge of CLKOUT.
18
Preliminary Rev. 0.46