CM312 Datasheet, PDF (45/56 Pages) List of Unclassifed Manufacturers – Communications utilityModule

a:\net\net initialize
a:\net\nwlink
a:\net\net start
net use z: \\SERVER_NT\Clients
echo Running Setup...
z:\msclient\netsetup\setup.exe /$
CONFIG.SYS
files=30
device=a:\net\ifshlp.sys
lastdrive=z
DEVICE=A:\NET\HIMEM.SYS
DEVICE=A:\NET\EMM386.EXE NOEMS
DOS=HIGH,UMB
PROTOCOL.INI
[network.setup]
version=0x3110
netcard=ms$ne2clone,1,MS$NE2CLONE,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$nwlink,MS$NWLINK
lana0=ms$ne2clone,1,ms$nwlink
lana1=ms$ne2clone,1,ms$ndishlp
[ms$ne2clone]
drivername=MS2000$
INTERRUPT=5
IOBASE=0x360
; SlotNumber=1
[protman]
drivername=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
drivername=ndishlp$
BINDINGS=ms$ne2clone
[ms$nwlink]
drivername=nwlink$
FRAME=Ethernet_802.2
BINDINGS=ms$ne2clone
LANABASE=0
Packet Drivers
The packet driver is loaded using the following syntax:
NE2000 [-n] [-d] [-w] <packet_int_no> <int_level> <io_addr>
Using the default settings, this would be entered as:
CM312 Quad Serial utilityModule
35
RTD Embedded Technologies, Inc.