CM312 Datasheet, PDF (42/56 Pages) List of Unclassifed Manufacturers – Communications utilityModule

The default is the board's unique IEEE address if this line is not present.
FRAME TYPE
May be set by including the following in the command line
Frame = <type>
where <type> is ETHERNET_802.3, ETHERNET_802.2, ETHERNET_II,
ETHERNET_SNAP
This defaults to ETHERNET_802.3 if the line is not present.
MEDIA TYPE SELECTION
The user may select the media type to be used. This option is specified via parameter passing in the
command line.
The parameter name is "MEDIA_TYPE=" . The value following the keyword must be one of the
following:
• "AUTO" for automatic selection.
• "10BASET" for 10BaseT.
• "AUI”
for AUI interface.
If the MEDIA_TYPE keyword is not present the driver will use the module’s EEPROM default.
CM312 Quad Serial utilityModule
32
RTD Embedded Technologies, Inc.