SD1010 Datasheet, PDF (43/46 Pages) List of Unclassifed Manufacturers – Dual-Interface XGA TFT LCD Display Controller

SmartASIC, Inc.
SD1010
4.4. DC Electrical Characteristics for 3.3 V Operation
(Under Recommended Operation Conditions and VCC = 3.0 ~ 3.6V, TJ = 0°C to +115°C)
Symbol
Parameter
Conditions
Min. Typ. Max. Units
VIL
Input low voltage
CMOS
0.3*VCC V
VIH
Input high voltage
CMOS
0.7*VCC
V
VT-
Schmitt trigger
COMS
1.20
V
negative going
threshold voltage
VT+
Schmitt trigger
COMS
2.10
V
positive going
threshold voltage
VOL
Output low voltage
IOH=2,4,8,12,
0.4
V
16,24 mA
VOH
Output high voltage
IOH=2,4,8,12, 2.4
V
16,24 mA
RI
Input
VIL=0V or
pull-up /down resistance
VIH=VCC
75
KΩ
4.5. DC Electrical Characteristics for 5V Operation
(Under Recommended Operation Conditions and VCC=4.75~5.25,TJ=0°C to +115°C)
Symbol
Parameter
Conditions
Min. Typ. Max. Units
VIL
Input low voltage
COMS
0.3*VCC V
VIH
Input high voltage
COMS
0.7*VCC
V
VIL
Input low voltage
TTL
0.8
V
VIH
Input high voltage
TTL
2.0
V
VT- Schmitt trigger negative
CMOS
1.78
V
going threshold voltage
VT+
Schmitt trigger
COMS
3.00
V
positive going threshold
voltage
VT- Schmitt trigger negative
TTL
1.10
V
going threshold voltage
VT+ Schmitt trigger positive
TTL
1.90
V
going
threshold voltage
VOL
Output low voltage IOL=2,4,8,16,24mA
0.4
V
VOH
Output high voltage
IOH=2,4,8,16,24
3.5
V
mA
RI
Input pull-up / down
VIL=0V or
50
KΩ
resistance
VIH=VCC
November, 1999
SmartASIC Confidential
43
Revision B