IC693MDL760 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Solenoid Valve Output Module

GFK-1881A
November 2000
Solenoid Valve Output Module
IC693MDL760
Product Description
Description
This IC693MDL760 output module provides eleven
pneumatic outputs and five 24VDC sourcing outputs. For
each pneumatic output, the module contains an internal 3-
way solenoid-actuated valve and an associated output
fitting, which is located on the front panel. When an
output is turned ON, its internal valve connects a user-
supplied pressure source (100 psi maximum) to the output
fitting. The pressure source is connected to the fitting on
the bottom of the module. When the output is turned
OFF, the valve’s output port is vented to atmosphere
inside the module. Solenoid power is supplied from an
external 24VDC source to the “DC Outputs” connector on
the front panel.
A 12-pin connector, located on the module’s front panel,
allows the user to connect the optional IC693ACC760
Solenoid Forcing Pendent, described later.
The five 24VDC outputs can each drive up to a maximum
0.5A, with a limit of 2.0A total for all five points. Field
wiring is connected to these outputs via a 10-pin
connector located on the front panel. The user must
provide 24VDC to this connector to power the positive
logic outputs, which source current to the field
connections. This group of five discrete outputs is
electrically isolated from the PLC backplane; however,
the outputs are not individually isolated from each other.
The module is accessed from the logic program as a
standard 16-point output module. When using VersaPro
version 2.0 (or later version) programming software, it
should be configured by its catalog number. When using
programming software other than VersaPro version 2.0
(or later version), the module must be configured as a
standard 16-point generic output module.
PWR
1
1
2
2
3
4
3
5
6
4
7
8
9
5
10
6
1
2
7
3
4
8
5
9
10
11
Figure 1. IC693MDL760 Module
The module is enclosed in a standard IC693 plastic
housing.