EPC110 Datasheet, PDF (15/27 Pages) Espros Photonics corp – Fully integrated configurable light barrier driver & receiver

epc110
SENSH
n/a
2
18
6...4 Upper threshold setting of the p hoto current sensitivity IPDH. to trigger output OUTH.
6 5 4 Values Default Recommended Recommended Setting
0 0 0 60nA X
0 0 1 72nA
Common use is to set this value 50% above the value used at SENSN,
i.e., if SENSN is put to 48nA, set SENSH to 72nA.
01 0
01 1
84nA
96nA
The tolerance of the threshold is approx. ±25%.
X
1 0 0 108nA
1 0 1 120nA
1 1 0 132nA
1 1 1 144nA
2
18
15...7 no function, must be set as listed below
15 14 13 12 11 10 9 8 7
000010101
Sample Parameter Setting
In the section “Applications“ you will find programming examples for “Long range light barrier application (refer also to datasheet epc111)“ and
for “High speed detection rate design (refer also to datasheet epc112) “.
© 2011 ESPROS Photonics Corporation
15
Characteristics subject to change without notice
Datasheet epc110 - V2.1
www.espros.ch