DRB-24V020ABX Datasheet, PDF (8/11 Pages) Delta Electronics, Inc. – Full corrosion resistant Aluminium chassis

TECHNICAL DATASHEET
CliQ II Buffer Module
24V 20A / DRB-24V020AB□
Functions
Buffering, Ready, and Inhibit Signal
Buffering Signal (B)
Maximum Signal Voltage
Maximum Signal Current
Isolation (Signal Port to Power Port)
Ready Signal (R)
Maximum Signal Voltage
Maximum Signal Current
Isolation (Signal Port to Power Port)
Inhibit Signal (I)
Maximum Signal Voltage
Maximum Signal Current
Shut-down Threshold
Isolation (Signal Port to Power Port)
Operating Diagram
“High” = Buffer Module is discharging or in Buffering
35Vdc
10mA
1.5KVac
“High” = Buffer Module is fully charged or in Standby Mode
35Vdc
10mA
1.5KVac
“Low” = Shuts down Buffer Module
35Vdc
10mA
6Vdc Min / 10Vdc Max
1.5KVac
Wiring Schematics
Typical Application Notes can be found on Page 9.
8
All parameters are specified at 25°C ambient unless otherwise noted.
www.DeltaPSU.com (October 2013, Rev. 01)