DRB-24V020ABX Datasheet, PDF (3/11 Pages) Delta Electronics, Inc. – Full corrosion resistant Aluminium chassis

TECHNICAL DATASHEET
CliQ II Buffer Module
24V 20A / DRB-24V020AB□
Case Cover
Dimensions (L x W x D)
Unit Weight
LED Indicators
Cooling System
Terminal
Wire
Mounting Rail
Environment
Surrounding Air Temperature
Component De-rating
Operating Humidity
Operating Altitude
Shock Test (Non-Operating)
Vibration (Non-Operating)
Pollution Degree
Protections
Overvoltage
Overload / Overcurrent
Short Circuit
Penetration Protection
Reverse Polarity Protection
Degree of Protection
Protection Against Shock
*PE: Primary Earth
Aluminium
121 x 70 x 120.1 mm
0.76kg
Green LED Off Unit is discharged or Vin < 22Vdc
Green LED On Unit is fully charged
Green LED Blinking Slowly (1Hz) Unit is charging
Green LED Blinking Quickly (10Hz) Unit is discharging
Convection
Input / Output M3 x 2 Pins (Rated 300V/30A)
Signal M3 x 5 Pins (Rated 300V/30A)
Input / Output AWG 12-10
Signal AWG 24-10
Standard TS35 DIN Rail in accordance with EN60715
Operating
Storage
-25°C to +75°C
-25°C to +85°C
Vin = 22.8-28.8Vdc, Max load
- Tambient = 50°C
- Tj < 85% of Tjmax
< 95% RH (Non-Condensing)
2,500 Meters
IEC60068-2-27, 30G (300m/S²) for a duration of 18ms
IEC60068-2-6, 10Hz to 500Hz @ 30m/S² (3G peak);
60 min per axis for all X, Y, Z direction
2
32V +10%
30A Max
No Damage
> 3.5mm (eg. screws, small parts)
Yes
IP20
Class I without PE* connection
3
All parameters are specified at 25°C ambient unless otherwise noted.
www.DeltaPSU.com (October 2013, Rev. 01)