MTB60P15H8 Datasheet, PDF (2/10 Pages) Cystech Electonics Corp. – P-Channel Enhancement Mode Power MOSFET

CYStech Electronics Corp.
Spec. No. : C960H8
Issued Date : 2014.10.30
Revised Date : 2014.11.14
Page No. : 2/10
Absolute Maximum Ratings (Ta=25°C)
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current @ TC=25°C, VGS=-10V (Note1)
Continuous Drain Current @ TC=100°C, VGS=-10V (Note1)
Continuous Drain Current @ TA=25°C, VGS=-10V (Note2)
Continuous Drain Current @ TA=70°C, VGS=-10V (Note2)
Pulsed Drain Current
(Note3)
Avalanche Current
Avalanche Energy @ L=0.1mH, ID=-50A, VDD=-30V
TC=25℃
(Note1)
Total Power Dissipation
TC=100℃
TA=25°C
(Note1)
(Note2)
TA=70°C
(Note2)
Operating Junction and Storage Temperature Range
Symbol
VDS
VGS
ID
IDSM
IDM
IAS
EAS
PD
PDSM
Tj, Tstg
10s Steady State Unit
-150
V
±20
-23
-16.3
-5.9 -3.5
A
-4.7 -2.8
-50 *1,2
-50
125
mJ
100
50
W
5.4
1.9
3.4
1.2
-55~+175
°C
Thermal Data
Parameter
Symbol Typical Maximum Unit
Thermal Resistance, Junction-to-case
Rth,j-c
1
1.5
°C/W
Thermal Resistance, Junction-to-ambient ^t≤10s
(Note2) _{Steady State}
Rth,j-a
18
50
23
65
°C/W
Note : 1.The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful
in setting the upper dissipation limit for cases where additional heatsinking is used.
2. The value of RθJA is measured with the device mounted on 1 in²FR-4 board with 2 oz. copper, in a still air
environment with TA=25°C. The power dissipation PDSM is based on RθJA and the maximum allowed junction
temperature of 150°C. The value in any given application depends on the user’s specific board design.
3. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C. Ratings are based on low frequency
and low duty cycles to keep initial TJ=25°C.
Characteristics (TC=25°C, unless otherwise specified)
Symbol
Min.
Typ.
Max.
Unit Test Conditions
Static
BVDSS
-150
-
-
V
VGS=0V, ID=-250μA
VGS(th)
-0.7
-
-2.0
V
VDS = VGS, ID=-250μA
GFS *1
-
22.4
-
S
VDS =-15V, ID=-5.2A
IGSS
-
-
±100
nA V_GS=±20V
IDSS
-
-
-
-
-1
-25
μA
VDS =-120V, VGS =0V
VDS =-120V, VGS =0, Tj=125°C
-
RDS(ON) *1
-
56
70
mΩ VGS =-10V, ID=-5.2A
60
80
mΩ VGS =-4.5V, ID=-5A
MTB60P15H8
CYStek Product Specification