MTB12P06E3 Datasheet, PDF (2/8 Pages) Cystech Electonics Corp. – P-Channel Enhancement Mode Power MOSFET

CYStech Electronics Corp.
Spec. No. : C584E3
Issued Date : 2015.06.18
Revised Date : 2016.05.16
Page No. : 2/8
Absolute Maximum Ratings (TC=25°C, unless otherwise noted)
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current @ TC=25°C, VGS=-10V
Continuous Drain Current @ TC=100°C, VGS=-10V
Pulsed Drain Current
Continuous Drain Current @ TA=25°C
Continuous Drain Current @ TA=70°C
Avalanche Current
Avalanche Energy @ L=100μH, ID=-58A, VDS=-30V
Power Dissipation
TC=25°C
TC=100°C
Power Dissipation
TA=25°C
TA=70°C
Operating Junction and Storage Temperature
Symbol
Limits
Unit
VDS
-60
V
VGS
±20
(Note 4)
ID
-58
(Note 4)
-41
(Note 3)
IDM
-232
A
(Note 2)
-7.8
IDSM
(Note 2)
-6.2
(Note 3)
IAS
-58
(Note 2)
EAS
168
mJ
(Note 1)
125
PD
(Note 1)
62.5
W
(Note 2)
2
PDSM
(Note 2)
1.3
Tj, Tstg -55~+175
°C
Thermal Data
Parameter
Thermal Resistance, Junction-to-case, max
Thermal Resistance, Junction-to-ambient, max, t≤10s (Note 1)
Thermal Resistance, Junction-to-ambient, max
(Note 1)
Symbol
RθJC
RθJA
Value
1.2
15
62.5
Unit
°C/W
Note : 1.The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful
in setting the upper dissipation limit for cases where additional heatsinking is used.
2. The value of RθJA is measured with the device mounted on 1 in²FR-4 board with 2 oz. copper, in a still air environment
with TA=25°C. The power dissipation PDSM is based on RθJA and the maximum allowed junction
temperature of 150°C. The value in any given application depends on the user’s specific board design, and the
maximum temperature of 175°C may be used if the PCB allows it.
3. Pulse width limited by junction temperature TJ(MAX)=175°C. Ratings are based on low frequency and low duty cycles
to keep initial TJ=25°C.
4. Calculated continuous drain current based on maximum allowable junction temperature.
5. The static characteristics are obtained using <300μs pulses, duty cycle 0.5% maximum.
6. The RθJA is the sum of thermal resistance from junction to case RθJC and case to ambient.
MTB12P06E3
CYStek Product Specification