ES239 Datasheet, PDF (31/36 Pages) Cyrustek corporation – 6000 Counts DMM / Inrush

ES239
6000 Counts DMM / Inrush
3.7. CR
Carriage return: The transmitted code is 00001101.
3.8. LF
Line feed: The transmitted code is 00001010.
4. Miscellaneous
The conditions, which the meter turns on the buzzer, include:
(1) Changing measurement mode generates one beep.
(2) Pressing any of the push functions generates one beep, if the function is valid.
(3) Power on and re-power on generate one beep.
(4) Input overflow in voltage and current mode generates one beep every 0.3 seconds (or 3.33
beeps per second.)
(5) Continuity(diode) check generates a continuous 2KHz beep whenever the measurement is less
then 30Ω(30mV)
(6) Auto power off generates a 2KHz beep which lasts for 1.5 seconds.
The following figures show the output waveform from the BUZOUT pin.
0.5 mS
(a) Continuous 2KHz beep
0.15 sec
0.3 sec
(b) 3.33 beep/sec
V 2.2
31
2015/12/15