LUPA-1300 Datasheet, PDF (42/48 Pages) Cypress Semiconductor – 1.3 M Pixel High Speed CMOS Image Sensor

LUPA-1300
Datasheet
6.4 Glass transmittance
6.4.1 Monochrome
A D263 glass will be used as protection glass lid on top of the LUPA-1300
monochrome sensors. Figure 23 shows the transmission characteristics of the D263
glass.
100
90
80
70
60
50
40
30
20
10
0
400
500
600
700
800
900
Wavelength [nm ]
Figure 23: Transmission characteristics of the D263 glass used as protective cover for
the IBIS5A-1300 sensors.
6.4.2 Color
For color devices a near infrared attenuating color filter glass is used. The dominant
wavelength is around 490 nm. Figure 24 shows the transmittance curve for the glass.
A S8612 glass will be used as NIR cut-off filter on top of the LUPA-1300-C color
image sensor. Figure 24 shows the transmission characteristics of the S8612 glass.
Cypress Semiconductor Corporation 3901 North First Street
San Jose, CA 95134 408-943-2600
Contact [e-mail] Document # : 38-05711 Rev.**( Revision 3.1) Page 42 of 48