MB39C831 Datasheet, PDF (37/40 Pages) Cypress Semiconductor – Ultra Low Voltage Boost Power Management IC for Solar/Thermal Energy Harvesting Datasheet

MB39C831
18. Major Changes
Page
Section
Preliminary 0.1 [June 14, 2013]
-
-
Revision 1.0 [November 18, 2013]
8
6.Block Diagram
9
7.Absolute Maximum Ratings
11, 12
9.Electrical Characteristics
10.Function
14
10.3 MPPT control
10.4 Function
16
UVLO
18
11.Example
19, 20
12.Typical Applications Circuit
Circuit
21
Parts list
23
14.Ordering Information
24
15.Marking
25
16.Product Label
26
17.Recommended Mounting Conditions
-
-
Revision 2.0 [August 29, 2014]
11, 12
9. Electrical Characteristics
Table 9-1, Table 9-2
10.2 Start-up/Shut-down sequence
15
Figure 10-1
10.2 Start-up/Shut-down sequence
17
Figure 10-2
10.4 Function description
19
Table 10-2, Table 10-3
10.4 Function description
21
State notification
Table 10-4, Table 10-5
25, 26
12. Application Notes
27 to 31 13. Typical Characteristics
32
14. Layout for Printed Circuit Board
36 to 39 18. Product Labels
Revision 3.0 [October 10, 2014]
3
1. Description
Change Results
Initial release
Added capacitor
Added the Rating and of Power dissipation and Figure 7-1
Divided old table into system in general table and Boost DC/DC converter
table.
Added ENA=H into the condition on the table.
Changed the Input power supply current condition
Added more description
Changed the sentence "This function is independent of MPPT_ENA." to"
This function operates in the charge mode."
Added standard example
Added D2 and C11
Added D2 and C11
Added "Figures 14-2 EVB ORDERING INFORMATION"
Added new
Added new
Added new
Company name and layout design change
The table of the electrical characteristics was divided into that of the
constant voltage mode and that of charge mode
Added the sequences of MPPT_ENA, ENA, DET1, and DET0 pins.
Added the sequences of MPPT_ENA, ENA, DET1, and DET0 pins.
The table of the preset output voltage and the MPPT setting was divided
into that of the preset output voltage and that of the MPPT setting.
The table of the state notification was divided into that of the constant
voltage mode and that of charge mode
Added the 12. Application Notes
Added the 13. Typical Characteristics
Added the 14. Layout for Printed Circuit Board
Changed the 18. Product Labels
Made a change in the sentence.
(MPPT) → (MPPT: Maximum Power Point Tracking)
Document Number: 002-08404 Rev *A
Page 37 of 40