CY8C20XX6A_13 Datasheet, PDF (19/51 Pages) Cypress Semiconductor – 1.8 V Programmable CapSense® Controller with SmartSense™ Auto-tuning 1–33 Buttons, 0–6 Sliders

CY8C20XX6A/S
Electrical Specifications
This section presents the DC and AC electrical specifications of the CY8C20XX6A/S PSoC devices. For the latest electrical specifi-
cations, confirm that you have the most recent datasheet by visiting the web at http://www.cypress.com/psoc.
Figure 12. Voltage versus CPU Frequency
5.5V
1.71V
750 kHz
3 MHz
CPU Frequency
24 MHz
Absolute Maximum Ratings
Exceeding maximum ratings may shorten the useful life of the device. User guidelines are not tested.
Table 11. Absolute Maximum Ratings
Symbol
Description
Conditions
Min Typ Max Units
T_STG
Storage temperature
Higher storage temperatures reduce data
–55
+25 +125
°C
retention time. Recommended Storage
Temperature is +25 °C ± 25 °C. Extended
duration storage temperatures above 85 °C
degrades reliability.
V_DD
V_IO
V_IOZ[43]
I_MIO
ESD
Supply voltage relative to V_SS
–
DC input voltage
–
DC voltage applied to tristate
–
Maximum current into any port pin –
Electrostatic discharge voltage Human body model ESD
–0.5
–
+6.0
V
V_SS – 0.5 – V_DD + 0.5 V
V_SS – 0.5 – V_DD + 0.5 V
–25
–
+50
mA
2000
–
–
V
LU
Latch-up current
In accordance with JESD78 standard
–
–
200
mA
Operating Temperature
Table 12. Operating Temperature
Symbol
Description
Conditions
Min
T_A
Ambient temperature
–
–40
T_C
Commercial temperature range –
0
T_J
Operational die temperature
The temperature rise from ambient to
junction is package specific. Refer the
Thermal Impedances on page 37. The user –40
must limit the power consumption to comply
with this requirement.
Typ Max Units
–
+85
°C
70
°C
–
+100
°C
Note
43. Port1 pins are hot-swap capable with I/O configured in High-Z mode, and pin input voltage above V_DD.
Document Number: 001-54459 Rev. *T
Page 19 of 51