FX802 Datasheet, PDF (14/14 Pages) Sanyo Semicon Device – DC-DC Converter

Package Outlines
The FX802 is available in the package styles outlined
below. Mechanical package diagrams and specifications
are detailed in Section 10 of this document.
Pin 1 identification marking is shown on the relevant
diagram and pins on all package styles number
anti-clockwise when viewed from the top.
Handling Precautions
The FX802 is a CMOS LSI circuit which includes input
protection. However precautions should be taken to
prevent static discharges which may cause damage.
FX802J 28-pin cerdip DIL
(J5) FX802LG 24-pin quad plastic encapsulated
bent and cropped
(L1)
NOT TO SCALE
NOT TO SCALE
Max. Body Length 37.05mm
Max. Body Width 13.36mm
Max. Body Length 10.25mm
Max. Body Width 10.25mm
FX802LS 24-lead plastic leaded chip carrier
(L2)
Ordering Information
FX802J
FX802LG
FX802LS
28-pin cerdip DIL
(J5)
24-pin encapsulated bent and
cropped
(L1)
24-lead plastic leaded chip
carrier
(L2)
NOT TO SCALE
Max. Body Length 10.40mm
Max. Body Width 10.40mm
CML does not assume any responsibility for the use of any circuitry described. No circuit patent licences are implied
and CML reserves the right at any time without notice to change the said circuitry.