CPC7594 Datasheet, PDF (10/20 Pages) Clare, Inc. – Line Card Access Switch

CPC7594
1.9 Protection Circuitry Electrical Specifications
Parameter
Conditions
Symbol Minimum Typical Maximum
Unit
Protection Diode Bridge
Forward Voltage drop,
continuous current
(50/60 Hz)
Apply ± dc current limit of break
switches
V_F
-
2.1
3.0
V
Forward Voltage drop, Apply ± dynamic current limit of break
surge current
switches
V_F
-
5
-
Protection SCR (CPC7594xA and CPC7594xC)
Surge current
-
-
-
-
*
A
Trigger current:
SCR activates, +25° C
Current into V_BAT pin. _{SCR activates, +85° C}
134
I_TRIG
-
87
-
mA
Hold current: Current ^{SCR remains active, +25° C}
through protection SCR _{SCR remains active, +85° C}
-
250
I_HOLD
110
184
-
mA
Gate trigger voltage I_GATE = I_TRIGGER§
V_TBAT or
V_RBAT
V_BAT -4
-
V_BAT -2
V
Reverse leakage current V_BAT = -48 V
I_VBAT
-
0.02
1.0
μA
On-state voltage
0.5 A, t = 0.5 μs
2.0 A, t = 0.5 μs
V_TBAT or
V_RBAT
-
-3
-5
-
V
Temperature Shutdown Specifications
Shutdown activation
temperature
Not production tested - limits are
T_{TSD_on}
110
125
150
°C
guaranteed by design and Quality
Shutdown circuit
hysteresis
Control sampling audits.
T_{TSD_off}
10
-
25
°C
*Passes GR1089 and ITU-T K.20 with appropriate secondary protection in place.
§_{VBAT must be capable of sourcing ITRIGGER for the internal SCR to activate.}
10
www.clare.com
R03