AA3-B0-10-450-1B1-C Datasheet, PDF (7/24 Pages) Carling Technologies – Circuit Breaker

A-Series Handle UL489A – Ordering Scheme | 7
A
1
Series
A
2
Actuator
1
3
Poles
—B
4
Circuit
0 — 14 — 450 — 1
5
Aux/Alarm
Switch
6
Frequency
& Delay
7
Current Rating
8
Terminal
B
9
Actuator
Color
1 —M
10
Mounting/
Barriers
11
Max. Appl.
Rating
T
12
Agency
Approval
1 SERIES
A
2 ACTUATOR¹
A Handle, one per pole
S Mid-Trip Handle, one per pole
T Mid-Trip Handle, one per pole & Alarm Switch
3 POLES²
1
One
2
Two
3
Three
4
Four
4 CIRCUIT
B Series Trip (Current)
5 AUXILIARY/ALARM SWITCH²
0
w/o Aux Switch
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
7
S.P.S.T., 0.110 Q.C. Term.

(Gold Contacts)
8
S.P.S.T., 0.187 Q.C. Term.
9
S.P.D.T., 0.187 Q.C. Term.
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
52³ DC, Short,Hi-Inrush
54³ DC, Medium, Hi-Inrush
56³ DC, Long, Hi-Inrush
7 CURRENT RATING (AMPERES)
CODE AMPERES
210 0.100
285 0.850
215 0.150
290 0.900
220 0.200
295 0.950
225 0.250
410 1.000
230 0.300
512 1.250
235 0.350
415 1.500
240 0.400
517 1.750
245 0.450
420 2.000
250 0.500
522 2.250
255 0.550
527 2.750
260 0.600
430 3.000
265 0.650
435 3.500
270 0.700
440 4.000
275 0.750
445 4.500
280 0.800
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613
614
615
616
617
618
620
622
624
625
630
635³
640³
645³
650³
13.000
14.000
15.000
16.000
17.000
18.000
20.000
22.000
24.000
25.000
30.000
35.000
40.000
45.000
50.000
8 TERMINAL⁵
1⁶ Push-On 0.250 Tab (Q.C.)
2
Screw 8-32 w/upturned lugs
3⁷ Screw 8-32 (Bus Type)
4
Screw 10-32 w/upturned lugs
5⁷ Screw 10-32 (Bus Type)
6
Screw 8-32 w/upturned lugs
and 30° bend
7
Screw 8-32 (Bus Type) and
30° bend
8
Screw 10-32 w/upturned lugs
and 30° bend
9
Screw 10-32 (Bus Type) and

30° bend
B Screw M5 w/upturned lugs
F Screw M5 w/upturned lugs

and 30° bend
G Screw M5 (Bus Type)

and 30° bend
H Screw M5 (Bus Type)
M⁷ M6 Threaded Stud
P⁸ Printed Circuit Board Terminals
Q⁹ Push-In Stud
9 ACTUATOR COLOR & LEGEND
Acuator Color
I-O
Dual
White
B
1
Black
D
2
Red
G
3
Green
J
4
Blue
L
5
Yellow
N
6
Gray
Q
7
Orange
S
8
Black (short handle)¹⁰ U
9
Legend Color
Black
White
White
White
White
Black
Black
Black
White
10 MOUNTING/BARRIERS
MOUNTING STYLE BARRIERS
Threaded Insert, 2 per pole
1
6-32 x 0.195 inches
no
A
6-32 x 0.195 inches
yes
2
ISO M3 x 5mm
no
B
ISO M3 x 5mm (multipole only)
yes
Front panel Snap-In, 0.75” wide bezel
5
without Handleguard no
6
without Handleguard (multipole only)
yes
Front panel Snap-In, 0.96” wide bezel
7
without Handleguard, 1-pole 0.96” wide;
no
multipole units have .105” bezel overhang on all sides
8
without Handleguard, 1-pole 0.96” wide;
yes
(multipole only) .105” bezel overhang on all sides
11 MAXIMUM APPLICATION RATING
M 80 DC
12 AGENCY APPROVAL
T
UL489A LISTED
K
UL489A LISTED, VDE CERTIFIED
J
UL489A LISTED, TUV CERTIFIED
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the
breaker.
2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
3 VDE Certified to 30 amps. UL489A Listed to 50 amps.
4 VDE Certification available with single pole breakers only. UL489A Listing available with one
and two pole breakers.
5 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30 amps
are only available with Terminal Codes 5, 9 G, H, M and Q.
6 Terminal Code 1 (Push-On) available up to 25 amps with VDE Certification and 30 amps with
UL489A Listing, but is not recommended over 20 amps.
7 Terminal Codes 3, 5 and H (Bus Type) with VDE, are supplied with Lock Washers, and
Terminal Code M (M6 Threaded Stud) with VDE is supplied with Lock and Flat Washers.
These breakers are only VDE Certified when the washers are used.
8 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30 amps
with VDE Certification and 50 amps with UL489A Listing.
9 Terminal Code Q not available with VDE certification.
10 Single pole only.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [e-mail] • www.carlingtech.com