AZV99 Datasheet, PDF (1/15 Pages) Arizona Microtek, Inc – PECL/LVDS Oscillator Gain Stage & Buffer with Selectable Enable

AZV99
ARIZONA MICROTEK, INC.
PECL/LVDS Oscillator Gain Stage & Buffer with Selectable Enable
FEATURES
PACKAGE AVAILABILITY
• Green and RoHS Compliant /
Lead (Pb) Free Packages Available
• Similar Operation as AZ100LVEL16VT
except with LVDS Outputs
• Operating Range of 3.0V to 5.5V
• Minimizes External Components
• Selectable Enable Polarity and
Threshold (CMOS/TTL or PECL)
• Available in a 2x2 or 3x3mm
MLP Package
• S–Parameter (.s2p) and IBIS Model
Files Available on Arizona Microtek
Website
DESCRIPTION
PACKAGE
PART NUMBER MARKING NOTES
MLP 8 (2x2x0.75)
Green / RoHS
Compliant / Lead (Pb)
AZV99NG
Free
V1G
<Date Code>
1,2
MLP 8 (2x2x0.75)
AZV99NA
V9
<Date Code>
1,2
MLP 8 (2x2x0.75)
Green / RoHS
Compliant / Lead (Pb)
Free
AZV99NBG
V8G
<Date Code>
1,2
MLP 8 (2x2x0.75)
Green / RoHS
Compliant / Lead (Pb)
AZV99NDG
V2G
<Date Code>
1,2
Free
MLP 16 (3x3) Green /
RoHS Compliant /
AZV99LG
Lead (Pb) Free
AZMG
V99
1,2
<Date Code>
TSSOP 8 RoHS
Compliant / Lead (Pb) AZV99T+
Free
AZ+
V99
1,2,3
DIE
AZV99XP
N/A
4
1 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape &
Reel.
2 Date code format: “Y” for year followed by “WW” for week.
3 Date Code “YWW” on underside of part.
4 Waffle Pack
The AZV99 is a specialized oscillator gain stage with LVDS output buffer including an enable. The enable
input (EN) allows continuous oscillator operation by only controlling the Q_HG /Q¯ _HG outputs.
The AZV99 also provides a V_BB and 470Ω internal bias resistors from D to V_BB and D¯ to V_BB. The V_BB pin can
support 1.5 mA sink/source current. Bypassing V_BB to ground with a 0.01 μF capacitor is recommended.
MLP 16, 3x3 mm Package (L) or DIE (X)
The MLP 16 and die versions of the AZV99 provide a selectable enable (EN). Enable polarity and threshold can
be selected to accommodate either CMOS/TTL or PECL input levels. See the enable truth table for enable function.
If enable pull-up is desired in the CMOS/TTL mode, an external ≤20kΩ resistor connecting EN to V_CC will override
the on-chip pull-down resistor.
Outputs Q/Q¯ each have a selectable on-chip pull-down current source. See the current source truth table for
current source functions. External resistors may also be used to increase pull-down current to a maximum of 25mA
(includes internal on-chip current source).
1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • [phone] • FAX [phone]
www.azmicrotek.com