HCPL-M600500 Datasheet, PDF (5/11 Pages) AVAGO TECHNOLOGIES LIMITED – Small Outline, 5 Lead, High CMR, High Speed, Logic Gate Optocouplers

Absolute Maximum Ratings
(No Derating Required up to 85°C)
Parameter
Storage Temperature
Operating Temperature
Forward Input Current - I_F (see Note 2)
Reverse Input Voltage - V_R
Supply Voltage - V_CC (1 Minute Maximum)
Output Collector Current - I_O
Output Collector Power Dissipation
Output Collector Voltage - V_O
(Selection for higher output voltages up to 20 V is available)
Infrared and Vapor Phase Reflow Temperature
Abs. Max.
-55°C to +125°C
-40°C to +85°C
20 mA
5V
7V
50 mA
85 mW
7V
see below
Solder Reflow Thermal Profile
300
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC. _PEAK
TEMP.
245°C
200
160°C
150°C
140°C
100
2.5°C ± 0.5°C/SEC.
3°C + 1°C/–0.5°C
PREHEATING TIME
150°C, 90 + 30 SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
240°C
PEAK
TEMP.
230°C
SOLDERING
TIME
200°C
50 SEC.
ROOM
TEMPERATURE
0
0
TIGHT
TYPICAL
LOOSE
50
100
150
200
250
Note: Non-halide flux should be used.
TIME (SECONDS)
Recommended Pb-Free IR Profile
t_p
T_p
T_L ^{217 °C}
260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
T_smax ^{150 - 200 °C}
T_smin
t_s
PREHEAT
t_L
60 to 180 SEC.
25
t 25 °C to PEAK
TIME
Note: Non-halide flux should be used.
5
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
T_smax = 200 °C, T_smin = 150 °C