HCPL-800J Datasheet, PDF (5/18 Pages) AVAGO TECHNOLOGIES LIMITED – Under-Voltage Detection

Regulatory Information
The HCPL-800J is pending for approval by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
with VIORM = 891 Vpeak.
UL
Recognized under UL 1577,
component recognition program, File E55361.
CSA
Approved under CSA
Acceptance Notice #5,
File CA 88324.
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics ⁽¹⁾
Description
Installation classification per DIN VDE 0110/1.89, Table 1
For rated mains voltage ≤ 150 Vrms
For rated mains voltage ≤ 300 Vrms
For rated mains voltage ≤ 600 Vrms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b ⁽²⁾
V_IORM x 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
Partial Discharge < 5 pC
Input to Output Test Voltage, Method a ⁽²⁾
V_IORM x 1.5 = V_PR, Type and Sample Test, t_m = 60 sec,
Partial Discharge < 5 pC
Highest Allowable Over-voltage ⁽²⁾
(Transient Over-voltage tini = 10 sec)
Safety-limiting values - maximum values allowed in the event of a failure
Case Temperature
Control Side Power ⁽³⁾
Line Side Power ⁽³⁾
Insulation Resistance at T_S, V_IO = 500 V
Symbol
V_IORM
V_PR
V_PR
V_IOTM
T_S
P_{S, INPUT}
P_{S, OUTPUT}
R_S
Characteristic
I – IV
I – III
I – II
55/100/21
2
891
1670
1336
6000
175
400
1500
>10⁹
Notes:
1. Isolation characteristics are guaranteed only within the safety
maximum ratings that must be ensured by protective circuits in
application. Surface mount classification is class A in accordance
with CECCOO802.
2. Refer to the optocoupler section of the Isolation and Control
Component Designer’s Catalog, under Product Safety Regulations
section, (IEC/EN/DIN EN 60747-5-2) for a detailed description of
Method a and Method b partial discharge test profiles.
3. Refer to the following figure for dependence of PS, INPUT and PS,
OUTPUT on case temperature.
1600
1400
1200
P_{S, OUTPUT}
P_{S, INPUT}
1000
800
600
400
200
0
0 25 50 75 100 125 150 175 200
T_S – CASE TEMPERATURE – °C
Unit
V_PEAK
V_PEAK
V_PEAK
V_PEAK
°C
mW
mW
Ω
5