SAM9G25_14 Datasheet, PDF (883/1167 Pages) ATMEL Corporation – Atmel | SMART ARM-based Embedded Microprocessor

• LINBK: LIN Break Sent or LIN Break Received
– Applicable if USART operates in LIN Master Mode (USART_MODE = 0xA):
0: No LIN Break has been sent since the last RSTSTA.
1:At least one LIN Break has been sent since the last RSTSTA
– If USART operates in LIN Slave Mode (USART_MODE = 0xB):
0: No LIN Break has received sent since the last RSTSTA.
1:At least one LIN Break has been received since the last RSTSTA.
• LINID: LIN Identifier Sent or LIN Identifier Received
– If USART operates in LIN Master Mode (USART_MODE = 0xA):
0: No LIN Identifier has been sent since the last RSTSTA.
1:At least one LIN Identifier has been sent since the last RSTSTA.
– If USART operates in LIN Slave Mode (USART_MODE = 0xB):
0: No LIN Identifier has been received since the last RSTSTA.
1:At least one LIN Identifier has been received since the last RSTSTA
• LINTC: LIN Transfer Completed
0: The USART is idle or a LIN transfer is ongoing.
1: A LIN transfer has been completed since the last RSTSTA.
• LINBLS: LIN Bus Line Status
0: LIN Bus Line is set to 0.
1: LIN Bus Line is set to 1.
• LINBE: LIN Bit Error
0: No Bit Error has been detected since the last RSTSTA.
1: A Bit Error has been detected since the last RSTSTA.
• LINISFE: LIN Inconsistent Synch Field Error
0: No LIN Inconsistent Synch Field Error has been detected since the last RSTSTA
1: The USART is configured as a Slave node and a LIN Inconsistent Synch Field Error has been detected since the last RSTSTA.
• LINIPE: LIN Identifier Parity Error
0: No LIN Identifier Parity Error has been detected since the last RSTSTA.
1: A LIN Identifier Parity Error has been detected since the last RSTSTA.
• LINCE: LIN Checksum Error
0: No LIN Checksum Error has been detected since the last RSTSTA.
1: A LIN Checksum Error has been detected since the last RSTSTA.
• LINSNRE: LIN Slave Not Responding Error
0: No LIN Slave Not Responding Error has been detected since the last RSTSTA.
1: A LIN Slave Not Responding Error has been detected since the last RSTSTA.
SAM9G25 [DATASHEET]
Atmel-11032E-ATARM-SAMG25-Datasheet_13-Oct-14
1883