ATA6614Q_14 Datasheet, PDF (6/311 Pages) ATMEL Corporation – 32K Flash Microcontroller with LIN Transceiver, 5V Regulator and Watchdog

Table 3-2. Maximum Ratings of the LIN-SBC (Continued)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameters
Logic pins (RXD, TXD, EN, NRES, NTRIG,
WD_OSC, MODE, TM)
Output current NRES
PVCC DC voltage
VCC DC voltage
Symbol
I_NRES
Min.
–0.3
–0.3
–0.3
Typ.
Max.
Unit
VCC + 0.5
V
+2
mA
+5.5
V
+6.5
V
Table 3-3. Maximum Ratings of the Microcontroller
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameters
Voltage on any Pin except RESET with respect to
Ground
Voltage on RESET with respect to Ground
Maximum Operating Voltage
DC Current per I/O Pin
DC Current MCUVCC and GND Pins
Injection Current at MCUVCC = 0V⁽¹⁾
Injection Current at MCUVCC = 5V
Note: 1. Maximum current per port = ±30mA
Symbol
Min.
–0.5
–0.5
Typ.
Max.
Unit
MCUVCC +
0.5
V
13.0
V
6.0
V
40.0
mA
200.0
mA
±5.0
mA
±1.0
mA
6
ATA6614Q [DATASHEET]
9240H–AUTO–10/14