EVK1101 Datasheet, PDF (52/54 Pages) ATMEL Corporation – Download and install avr32-gnu-toolchain-2.4.x and AVR32Studio-2.5.x

Section 6
Firmware Upgrade
6.1 Firmware upgrade overview
The tools (adapters) used to provide the physical connection between PC and target MCU contains firm-
ware. This firmware needs to be compatible with the gnu toolchain and AVR32 Studio installed on the
PC.
When AVR32 Studio is started, or when a new adapter is detected, AVR32 Studio will perform a firm-
ware version check to determine if the adapter firmware needs to be upgraded.
If AVR32 Studio contains a newer firmware than present in the adapter, the adapter will be upgraded.
6.2 Firmware version test and upgrade
When AVR32 Studio is testing the firmware version of connected adapters, you can see a progress indi-
cator in the status line.
Figure 6-1. Firmware version test
Figure 6-2. Firmware upgrade message
If the adapter firmware must be upgraded, you will be notified by a pop-up. Click OK to continue.
AVR ONE! Quick-start Guide
7-1
32104B–AVR ONE!–02/10