EVK1101 Datasheet, PDF (36/54 Pages) ATMEL Corporation – Download and install avr32-gnu-toolchain-2.4.x and AVR32Studio-2.5.x

5.4.3
Create demo application
Configure the target trace module for data trace
We would like to trace all data written to the debug UART. We do a quick lookup in the datasheet and
find that the UART registers are located between 0xffff1400 and 0xffff1d00. Although we only use one
UART in this application, we configure the data trace range to cover all UARTs.
Figure 5-24. Memory access type
Set Memory access type to write.
Figure 5-25. Data trace lower boundary
Set lower boundary to 0xffff1400.
Figure 5-26. Data trace upper boundary
Set upper boundary to 0xffff1d00.
AVR ONE! Quick-start Guide
6-14
32104B–AVR ONE!–02/10