EVK1101 Datasheet, PDF (26/54 Pages) ATMEL Corporation – Download and install avr32-gnu-toolchain-2.4.x and AVR32Studio-2.5.x

5.2.2
Configure target board and MCU
Figure 5-7. Details configuration tab
Create demo application
Set Device to UC3B0256 or UC3B0256ES, depending on what MCU is installed on your EVK1101.
Figure 5-8. MCU Markings
To check which type of MCU is mounted on your EVK1101 evaluation board, you can read the part num-
ber printed on the MCU. The picture shows the part number printed on an -ES part (-UES suffix).
Set Board to EVK1101.
Set MCU Clock source to Crystal and adjust the JTAG Clock to a suitable value (Usually 33MHz or
less. Max speed depends on target board signal quality). Click Apply.
The target and adapter configuration process is now complete.
AVR ONE! Quick-start Guide
6-4
32104B–AVR ONE!–02/10