EVK1101 Datasheet, PDF (27/54 Pages) ATMEL Corporation – Download and install avr32-gnu-toolchain-2.4.x and AVR32Studio-2.5.x

Create demo application
5.2.3
Target MCU Chip erase
If the EVK1101 evaluation board is brand new, or if it still contains the original demo application (Control
Panel Demo), the FLASH lock-bits need to be cleared. Right-click on the AVR ONE! In the AVR32 Tar-
get view and select Chip Erase.
WARNING! This process will erase the original demo application programmed at the factory. After this
operation the EVK1101 evaluation board will be completely empty. If you need to keep the original appli-
cation, you should not perform this operation.
If you would like to use your EVK1101 for this example, it is not difficult to restore the original “Control
Panel Demo application”. All you have to do is to build the “Control Panel Demo example” enclosed with
AVR32 Studio.
You should now perform the Chip Erase operation.
Figure 5-9. Chip erase operation
Right click on the target (AVR ONE!), and select Chip Erase.
AVR ONE! Quick-start Guide
6-5
32104B–AVR ONE!–02/10