EVK1101 Datasheet, PDF (22/54 Pages) ATMEL Corporation – Download and install avr32-gnu-toolchain-2.4.x and AVR32Studio-2.5.x

4.2 Connect the EVK1101 to power and RS232
Connect the EVK1101 to power and turn it on. The easiest way to provide power is to use the supplied
USB cable. Also connect the RS232 port to your PC using the supplied RS232 cable.
Switch it on by setting the power switch to VBUS.
Figure 4-2. Powering the EVK1101 using the USB cable
Note: If the EVK1101 contains the Control Panel Demo Application, you may be requested to install driv-
ers for it. Just cancel this request (you do not need to install this driver).
AVR ONE! Quick-start Guide
5-2
32104B–AVR ONE!–02/10