ATXMEGA384C3_14 Datasheet, PDF (46/125 Pages) ATMEL Corporation – 8/16-bit Atmel XMEGA C3 Microcontroller

28. ADC – 12-bit Analog to Digital Converter
28.1
Features
• One Analog to Digital Converter (ADC)
• 12-bit resolution
• Up to 300 thousand samples per second
– Down to 2.3µs conversion time with 8-bit resolution
– Down to 3.35µs conversion time with 12-bit resolution
• Differential and single-ended input
– 16 single-ended inputs
– 16x4 differential inputs without gain
– 8x4 differential input with gain
• Built-in differential gain stage
– 1/2x, 1x, 2x, 4x, 8x, 16x, 32x, and 64x gain options
• Single, continuous and scan conversion options
• Three internal inputs
– Internal temperature sensor
– AV_CC voltage divided by 10
– 1.1V bandgap voltage
• Internal and external reference options
• Compare function for accurate monitoring of user defined thresholds
• Optional event triggered conversion for accurate timing
• Optional DMA transfer of conversion results
• Optional interrupt/event on compare result
28.2
Overview
The ADC converts analog signals to digital values. The ADC has 12-bit resolution and is capable of converting up to 300
thousand samples per second (ksps). The input selection is flexible, and both single-ended and differential
measurements can be done. For differential measurements, an optional gain stage is available to increase the dynamic
range. In addition, several internal signal inputs are available. The ADC can provide both signed and unsigned results.
The ADC measurements can either be started by application software or an incoming event from another peripheral in
the device. The ADC measurements can be started with predictable timing, and without software intervention. It is
possible to use DMA to move ADC results directly to memory or peripherals when conversions are done.
Both internal and external reference voltages can be used. An integrated temperature sensor is available for use with the
ADC. The AV_CC/10 and the bandgap voltage can also be measured by the ADC.
The ADC has a compare function for accurate monitoring of user defined thresholds with minimum software intervention
required.
XMEGA C3 [DATASHEET]
46
Atmel-8361F-AVR-ATxmega384C3-Datasheet–11/2014