SAM9M10_14 Datasheet, PDF (197/1385 Pages) ATMEL Corporation – Atmel | SMART ARM-based Embedded MPU

20.9.3.2 Slow Clock Mode Transition
A Reload Configuration Wait State is also inserted when the Slow Clock Mode is entered or exited, after the end of
the current transfer (see “Slow Clock Mode” on page 209).
20.9.4 Read to Write Wait State
Due to an internal mechanism, a wait cycle is always inserted between consecutive read and write SMC accesses.
This wait cycle is referred to as a read to write wait state in this document.
This wait cycle is applied in addition to chip select and reload user configuration wait states when they are to be
inserted. See Figure 20-16 on page 195.
SAM9M10 [DATASHEET]
Atmel-6355G-ATARM-SAM9M10-Datasheet_02-Sept-14
197