AT24C02C Datasheet, PDF (16/23 Pages) ATMEL Corporation – Two-wire Serial Electrically Erasable and Programmable Read-only Memory

12. Packaging Information
8P3 – PDIP
1
E
E1
N
Top View
c
eA
End View
D
e
D1
A2 A
b3
4 PLCS
b2
L
b
Side View
COMMON DIMENSIONS
(Unit of Measure = inches)
SYMBOL
A
A2
b
b2
b3
c
D
D1
E
E1
e
eA
L
MIN NOM MAX
0.210
0.115 0.130 0.195
0.014 0.018 0.022
0.045 0.060 0.070
0.030 0.039 0.045
0.008 0.010 0.014
0.355 0.365 0.400
0.005
0.300 0.310 0.325
0.240 0.250 0.280
0.100 BSC
0.300 BSC
0.115 0.130 0.150
NOTE
2
5
6
6
3
3
4
3
4
2
Notes:
1. This drawing is for general information only; refer to JEDEC Drawing MS-001, Variation BA for additional information.
2. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3.
3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not exceed 0.010 inch.
4. E and eA measured with the leads constrained to be perpendicular to datum.
5. Pointed or rounded lead tips are preferred to ease insertion.
6. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed 0.010 (0.25mm).
TITLE
Package Drawing Contact: 8P3, 8-lead, 0.300” Wide Body, Plastic Dual
[e-mail] _{In-line Package (PDIP)}
GPC
07/19/10
DRAWING NO. REV.
PTC
8P3
C
16 Atmel AT24C02C
8700D–SEEPR–8/10