SAM9G10_14 Datasheet, PDF (158/750 Pages) ATMEL Corporation – Additional Embedded Memories

21.7.7.2
Software Configuration
The following configuration has to be performed:
• Assign the EBI CS4 and/or EBI_CS5 to the CompactFlash Slot 0 or/and Slot 1 by setting the
bit EBI_CS4A or/and EBI_CS5A in the EBI Chip Select Assignment Register located in the
bus matrix memory space.
• The address line A21 is to select Alternate True IDE (A21=1) or True IDE (A21=0) modes.
• CFRNW, CFS0, CFCS1, CFCE1 and CFCE2 signals are multiplexed with PIO lines and thus
the dedicated PIOs must be programmed in peripheral mode in the PIO controller.
• Configure a PIO line as an output for CFRST and two others as an input for CFIRQ and
CARD DETECT functions respectively.
• Configure SMC CS4 and/or SMC_CS5 (for Slot 0 or 1) Setup, Pulse, Cycle and Mode
accordingly to Compact Flash timings and system bus frequency.
158 SAM9G10
6462B–ATARM–6-Sep-11