|
ATF280F_14 Datasheet, PDF (1/107 Pages) ATMEL Corporation – Rad-Hard Reprogrammable FPGA | |||
|
ATF280F
Rad-Hard Reprogrammable FPGA
DATASHEET
Features
⢠SRAM-based FPGA designed for Space use
⢠280K equivalent ASIC gates
⢠14,400 cells ( two 3-input LUT or one 4-input LUT, one DFF)
⢠Unlimited reprogrammability
⢠SEE-hardened (Configuration RAM, FreeRAMTM, DFF, JTAG, I/O buffers)
⢠RHBD need for mitigation techniques during design
⢠FreeRAMâ¢
⢠115,200 bits of distributed RAM
⢠Organized in 32x4 blocks of RAM
⢠Independent of Logic Cells
⢠Single/Dual port capability
⢠Global reset option
⢠8 global clocks and 4 fast clocks
⢠8 LVDS transceivers and 8 LVDS receivers
⢠Cold-sparing and PCI-compliant I/Os
⢠Flexible configuration modes
⢠Master/Slave capability
⢠Serial/Parallel capability
⢠Check of the data during FPGA configuration
⢠Self Integrity Check (SIC) of the configuration during FPGA operation
⢠Performance
⢠50MHz system performance
⢠10ns 32X4 FreeRAM⢠access time
⢠Operating range
⢠Voltages
⢠1.65V to 1.95V (Core)
⢠3V to 3.6V (Clustered I/Os)
⢠Temperature
⢠- 55°C to +125°C
⢠Radiation performance
⢠Total dose tested up to 300 krads (Si)
⢠No single event latch-up below a LET of 80 MeV/mg/cm2
⢠ESD better than 2000V for I/O and better than 1000V for LVDS
⢠Quality grades
⢠QML-Q or V
⢠ESCC
⢠Ceramic packages
7750EâAEROâ05/12
|
▷ |