ARA2004_11 Datasheet, PDF (4/21 Pages) ANADIGICS, Inc – Address-Programmable Reverse Amplifier with Step Attenuator

ARA2004
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
pARAMeteR
Min
MAX
unit
Analog Supply (pins 2, 4, 9, 21, 24)
0
9
VDC
Digital Supply: VCMOS (pin 11)
0
6
VDC
Amplifier Controls: Vg1, Vg2 (pins 6, 23)
-5
2
V
RF Power at Inputs ( pins 5, 8)
-
+60
dBmV
Digital Interface (pins 12, 13, 14)
-0.5
VCMOS+0.5
V
Storage Temperature
-55
+200
8C
Soldering Temperature
-
260
8C
Soldering TIme
-
5
Sec
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation
is not implied under these conditions. Exposure to absolute ratings for extended periods of time
may adversely affect reliability.
Notes:
(1) Pins 3, 5, 8, 10, 19, 20, 25, 26 should be AC-coupled. No external DC bias should be applied.
(2) Pins 7 and 22 should be grounded or pulled to ground through a resistor. No external DC bias
pARAMeteR
Table 3: Operating Ranges
Min
tYp
MAX
unit
Amplifier Supply: VDD (pins 4, 9, 21, 24)
4.5
5
7
VDC
Attenuator Supply: VATTN (pin 2)
VDD-0.5
5
7
VDC
Digital Supply: VCMOS (pin 11)
3.0
-
5.5
VDC
Digital Interface
0
-
VCMOS
V
Amplifier Controls Vg1, Vg1 (pins 6, 23)
-5
1
2
V
Case Temperature
-40
25
85
8C
The device may be operated safely over these conditions; however, parametric performance is
guaranteed only over the conditions defined in the electrical specifications.
4
Data Sheet- Rev 2.2
04/2011