English
Language : 

AMIS-30522 Datasheet, PDF (5/28 Pages) AMI SEMICONDUCTOR – Micro-stepping Motor Driver
AMIS-30522 Micro-stepping Motor Driver
Data Sheet
6.3 DC Parameters
The DC parameters are given for VBB and temperature in their operating ranges unless otherwise specified. Convention: currents
flowing in the circuit are defined as positive.
Table 5: DC Parameters
Symbol Pin(s)
Parameter
Remark/Test Conditions
Supply and Voltage Regulator
VBB
IBB
VDD
IINT
ILOAD
VBB
VDD
Nominal operating supply range
Total internal current consumption
Regulated output voltage
Internal load current
Max. output current (external and
internal loads)
IDDLIM
Current limitation
ILOAD_PD
Output current in power down
Power-on-Reset (POR)
Unloaded outputs
Unloaded outputs
6V < VBB < 8V
8V < VBB < 30V
Pin shorted to ground
VDDH
VDDL
Motordriver
VDD
Internal POR comparator threshold
Internal POR comparator threshold
VDD rising
VDD falling
IMDmax,Peak
Max current through motor coil in
normal operation
IMDmax,RMS
Max RMS current through coil in normal
operation
IMDabs
IMDrel
RHS
RLS3
RLS2
MOTXP
MOTXN
MOTYP
MOTYN
Absolute error on coil current
Error on current ratio Icoilx / Icoily
On-resistance high-side driver,
CUR[4:0] = 0...31
On-resistance low-side driver,
CUR[4:0] = 23...31
On-resistance low-side driver,
CUR[4:0] = 16...22
RLS1
On-resistance low-side driver,
CUR[4:0] = 9...15
RLS0
On-resistance low-side driver,
CUR[4:0] = 0...8
IMpd
Pull-down current
Logic Inputs
Ileak
DI, CLK Input leakage (3)
VinL
NXT, DIR Logic low threshold
VinH
CLR, CSB Logic high threshold
Rpd
CLR
TST0
Internal pull-down resistor
Vbb = 12V, Tj = 27 °C
Vbb = 12V, Tj = 160 °C
Vbb = 12V, Tj = 27 °C
Vbb = 12V, Tj = 160 °C
Vbb = 12V, Tj = 27 °C
Vbb = 12V, Tj = 160 °C
Vbb = 12V, Tj = 27 °C
Vbb = 12V, Tj = 160 °C
Vbb = 12V, Tj = 27 °C
Vbb = 12V, Tj = 160 °C
HiZ mode
Tj = 160 °C
Thermal Warning and Shutdown
Ttw
T (1) (2)
tsd
Charge Pump
Thermal warning
Thermal shutdown
Vcp
Cbuffer
Cpump
Notes:
VCP Output voltage
External buffer capacitor
CPP CPN External pump capacitor
6V< VBB < 15V
15V < VBB < 30V
(1) No more than 100 cumulated hours in life time above Ttw.
(2) Thermal shutdown and low temperature warning are derived from thermal warning.
(3) Not valid for pins with internal pull-down resistor.
Min.
6
4.75
20
50
1
4.0
Typ.
5
Max.
Unit
30
V
8
mA
5.25
V
150
mA
4.25
4.4
V
3.68
V
-10
-7
3.5
120
1600
800
0.45
0.94
0.45
0.94
0.90
1.9
1.8
3.8
3.6
7.5
0.5
mA
mA
10
%
7
%
0.56
Ω
1.25
Ω
0.56
Ω
1.25
Ω
1.2
Ω
2.5
Ω
2.3
Ω
5.0
Ω
4.5
Ω
10
Ω
mA
1
µA
1.5
V
V
300
kΩ
138
145
152
°C
Ttw + 20
°C
2 * VBB – 2.5
V
VBB+12.5
VBB+14
VBB+15.5
V
180
220
470
nF
180
220
470
nF
AMI Semiconductor – June 2007, M-20684-001
5
www.amis.com