EP53A8LQA Datasheet, PDF (3/21 Pages) Altera Corporation – Integrated Inductor

PIN
9, 10, 11
12
13
14
NAME
VS2,
VS1,
VS0
ENABLE
AVIN
PVIN
EP53A8LQA/EP53A8HQA
FUNCTION
Output voltage select. VS2 = pin 9, VS1 = pin 10, VS0 = pin 11.
EP53A8LQA: Selects one of seven preset output voltages or an external resistor divider.
EP53A8HQA: Selects one of eight preset output voltages.
(Refer to section on output voltage select for more details.)
Output Enable. Enable = logic high; Disable = logic low
Input power supply for the controller circuitry. Connect to PVIN through a 100 Ohm resistor.
Input Voltage for the MOSFET switches.
Absolute Maximum Ratings
CAUTION: Absolute Maximum ratings are stress ratings only. Functional operation beyond the recommended operating
conditions is not implied. Stress beyond the absolute maximum ratings may impair device life. Exposure to absolute
maximum rated conditions for extended periods may affect device reliability.
PARAMETER
Input Supply Voltage
Voltages on: ENABLE, V_SENSE, V_SO – V_S2
Voltages on: V_FB (EP53A8LQA)
Maximum Operating Junction Temperature
Storage Temperature Range
Reflow Temp, 10 Sec, MSL3 JEDEC J-STD-020C
ESD Rating (based on Human Body Mode)
SYMBOL
V _IN
T _J-ABS
T _STG
MIN
-0.3
-0.3
-0.3
-65
MAX
6.0
V_IN+ 0.3
2.7
150
150
260
2000
UNITS
V
V
V
°C
°C
°C
V
Recommended Operating Conditions
Input Voltage Range
PARAMETER
Operating Ambient Temperature
Operating Junction Temperature
SYMBOL
V _IN
T_A
T_J
MIN
2.4
- 40
- 40
MAX
5.5
+105
+125
UNITS
V
°C
°C
Thermal Characteristics
PARAMETER
Thermal Resistance: Junction to Ambient –0 LFM (Note 1)
Thermal Overload Trip Point
Thermal Overload Trip Point Hysteresis
SYMBOL
θ _JA
T _J-TP
TYP
80
+155
25
Note 1: Based on a four layer copper board and proper thermal design per JEDEC EIJ/JESD51 standards.
UNITS
°C/W
°C
°C
Electrical Characteristics
NOTE: V_IN=3.6V, Minimum and Maximum values are over operating ambient temperature range unless otherwise noted.
Typical values are at T_A = 25°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNITS
Operating Input
Voltage
V _IN
2.4
5.5
V
Under Voltage Lock-
out – V_IN Rising
V _{UVLO_R}
2.0
V
Under Voltage Lock-
out – V_IN Falling
V _{UVLO_F}
1.9
V
10366
July 21, 2015
www.altera.com/enpirion, Page 3
Rev D