English
Language : 

AK4388 Datasheet, PDF (8/18 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit 2ch ΔΣ DAC
ASAHI KASEI
[AK4388]
OPERATION OVERVIEW
„ System Clock
The external clocks, which are required to operate the AK4388, are MCLK, LRCK and BICK. The master clock (MCLK)
should be synchronized with LRCK but the phase is not critical. The MCLK is used to operate the digital interpolation
filter and the delta-sigma modulator. There are two methods to set MCLK frequency. In Manual Setting Mode (ACKS
pin = “L”, Normal Speed Mode), the frequency of MCLK is set automatically (Table 1). After exiting reset (RSTN pin=
“↑”), the AK4388 is in Auto Setting Mode. In Auto Setting Mode (ACKS pin = “H”), as MCLK frequency is detected
automatically (Table 2), and the internal master clock becomes the appropriate frequency (Table 3).
All external clocks (MCLK,BICK and LRCK) should always be present whenever the AK4388 is in the normal operation
mode (RSTN pin = ”H”). If these clocks are not provided, the AK4388 may draw excess current and may fall into
unpredictable operation. This is because the device utilizes dynamic refreshed logic internally. The AK4388 should be
reset by RSTN pin = “L” after threse clocks are provided. If the external clocks are not present, the AK4388 should be in
the power-down mode (RSTN pin = “L”). After exiting reset at power-up etc., the AK4388 is in the power-down mode
until MCLK and LRCK are input.
LRCK
fs
32.0kHz
44.1kHz
48.0kHz
256fs
8.1920MHz
11.2896MHz
12.2880MHz
384fs
12.2880MHz
16.9344MHz
18.4320MHz
MCLK
512fs
16.3840MHz
22.5792MHz
24.5760MHz
768fs
24.5760MHz
33.8688MHz
36.8640MHz
1152fs
36.8640MHz
N/A
N/A
BICK
64fs
2.0480MHz
2.8224MHz
3.0720MHz
Table 1. System Clock Example (Manual Setting Mode, ACKS pin = “L”, Normal Speed Mode)
MCLK
1152fs
512fs
768fs
256fs
384fs
128fs
192fs
Mode
Normal
Normal
Double
Quad
Sampling Rate
8kHz~32kHz
8kHz~48kHz
32kHz~96kHz
120kHz~192kHz
Table 2. Sampling Speed (Auto Setting Mode, ACKS pin = “H”)
LRCK
fs
32.0kHz
44.1kHz
48.0kHz
88.2kHz
96.0kHz
176.4kHz
192.0kHz
128fs
-
-
-
-
-
22.5792
24.5760
192fs
-
-
-
-
-
33.8688
36.8640
MCLK (MHz)
256fs
384fs
512fs
8.1920 12.2880 16.3840
11.2896 16.9344 22.5792
12.2880 18.4320 24.5760
22.5792 33.8688
-
24.5760 36.8640
-
-
-
-
-
-
-
768fs
24.5760
33.8688
36.8640
-
-
-
-
Table 3. System Clock Example (Auto Setting Mode, ACKS pin = “H”)
1152fs
36.8640
-
-
-
-
-
-
When MCLK= 256fs/384fs, the Auto Setting Mode supports sampling rate of 32kHz~96kHz (Table 2). But, when the
sampling rate is 32kHz~48kHz, DR and S/N will degrade by approximately 3dB as compared to when MCLK=
512fs/768fs.
ACKS pin
L
H
H
MCLK
256fs/384fs/512fs/768fs
256fs/384fs
512fs/768fs
DR,S/N
106dB
103dB
106dB
Table 4. Relationship between MCLK frequency and DR, S/N (fs= 44.1kHz)
MS0485-E-01
-8-
2006/07