AK4388 Datasheet, PDF (18/18 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit 2ch ΔΣ DAC

ASAHI KASEI
[AK4388]
Date (YY/MM/DD) Revision
06/04/24
00
06/07/28
00
Reason
Page
First edition
Error Correction 12
14
Contents
Figure 6
DZF1/DZF2 Æ DZF
“(6) DZF pins are “L” in the power-down mode
(RSTB pin = “L”).” was added.
Figure 8
fc=154kHz, g=0.284dB at 40kHz Æ
fc=328.8kHz, g=-0.064dB at 40kHz
IMPORTANT NOTICE
• These products and their specifications are subject to change without notice. Before considering
any use or application, consult the Asahi Kasei Microsystems Co., Ltd. (AKM) sales office or
authorized distributor concerning their current status.
• AKM assumes no liability for infringement of any patent, intellectual property, or other right in the
application or use of any information contained herein.
• Any export of these products, or dev ices or systems containing them, may require an export
license or other official approval under the law and regulations of the country of export pertaining
to customs and tariffs, currency exchange, or strategic materials.
• AKM products are neither intended nor authorized for use as critical components in any safety, life
support, or other hazard related dev ice or system, and AKM assumes no responsibility relating to
any such use, except with the express written consent of the Representativ e Director of AKM. As
used here:
(a) A hazard related device or system is one designed or intended for life support or maintenance
of safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its
failure to function or perform may reasonably be expected to result in loss of life or in
significant injury or damage to person or property.
(b) A critical component is one whose failure to function or perform may reasonably be expected
to result, whether directly or indirectly, in the loss of the safety or effectiveness of the device
or system containing it, and which must therefore meet v ery high standards of performance and
reliability.
• It is the responsibility of the buyer or distributor of an AKM product who distributes, disposes of, or
otherwise places the product with a third party to notify that party in advance of the above content
and conditions, and the buyer or distributor agrees to assume any and all responsibility and liability
for and hold AKM harmless from any and all claims arising from the use of said product in the
absence of such notification.
MS0485-E-01
- 18 -
2006/07