AK8181G Datasheet, PDF (3/10 Pages) Asahi Kasei Microsystems – 3.3V LVDS 1:4 Clock Fanout Buffer

AK8181G
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Items
Symbol
Ratings
Unit
Supply voltage
VDD
-0.3 to 4.6
V
Input voltage
Vin
VSS-0.5 to VDD+0.5
V
Input current (any pins except supplies)
IIN
Storage temperature
Tstg
±10
mA
-55 to 150
C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
(2) VSS=0V
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKM recommends that this device is handled with
appropriate precautions.
Recommended Operation Conditions
Parameter
Symbol
Conditions
Min
Typ
Max Unit
Operating temperature
Supply voltage ⁽¹⁾
Ta
VDD
VDD5%
-40
85
C
3.135
3.3
3.465 V
(1) Power of 3.3V requires to be supplied from a single source. A decoupling capacitor of 0.1F for power supply line should
be located close to each VDD pin.
Pin Characteristics
Parameter
Input Capacitance
Input Pullup Resistor
Input Pulldown Resistor
Symbol
CIN
RPU
RPD
Conditions
Min
Typ
Max Unit
4
pF
51
kΩ
51
kΩ
Power Supply Characteristics
Parameter
Power Supply Current
Symbol
Conditions
CLK1 = input 650MHz
CLK2 = open
IDD
CLK1 = open
CLK2 = input 650MHz
Min
Typ
Max Unit
47 mA
47 mA
draft-E-01
-3-
Feb-2013