AKD4373-B Datasheet, PDF (25/34 Pages) Asahi Kasei Microsystems – AK4373 Evaluation Board Rev.1

[AKD4373-B]
8-2. A calculation of a register
A register setting values are displayed when [Register Setting] button is clicked. When any value is set to out or
range, error message is displayed, and a calculation of register setting is not executed.
Figure 22. A register setting calculation result
In the following cases, a register set values are updated.
(1) When [Register Setting] button was pushed.
(2) When [Frequency Response] button was pushed.
(3) When [UpDate] button was pushed on a frequency characteristic indication window.
(4) When set ON/OFF of a check button “Notch Filter Auto Correction”.
<KM091602>
- 25 -
2008/07