AK4425A Datasheet, PDF (21/27 Pages) Asahi Kasei Microsystems – 192kHz 24-Bit Stereo ΔΣ DAC with 2Vrms Output

[AK4425A]
■ Register Definitions
Addr Register Name
D7
D6
00H Control 1
ACKS
0
default
1
0
D5
D4
D3
D2
D1
D0
0
DIF2
DIF1
DIF0
PW
RSTN
0
0
1
0
1
1
RSTN: Internal timing reset control
0: Reset. All registers are not initialized.
1: Normal Operation
The click noise, which occurs when MCLK frequency or DFS is changed, can be reduced by RSTN
bit.
PW: Power down control
0: Power down. All registers are not initialized.
1: Normal Operation
DIF2-0: Audio data interface formats (Table 6)
Initial: “010”, Mode 2
ACKS: Master Clock Frequency Auto Setting Mode Enable
0: Disable, Manual Setting Mode
1: Enable, Auto Setting Mode
Master clock frequency is detected automatically at ACKS bit “1”. In this case, the settings of DFS1-0
are ignored. When this bit is “0”, DFS1-0 set the sampling speed mode.
Addr Register Name
D7
01H Control 2
0
default
0
D6
D5
D4
D3
D2
D1
D0
0
SLOW DFS1 DFS0 DEM1 DEM0 SMUTE
0
0
0
0
0
1
0
SMUTE: Soft Mute Enable
0: Normal operation
1: DAC outputs soft muted
DEM1-0: De-emphasis Response (Table 7)
Initial: “01”, OFF
DFS1-0: Sampling speed control
00: Normal Speed Mode
01: Double Speed Mode
10: Quad Speed Mode
When changing between Normal/Double Speed Mode and Quad Speed Mode, some click noise
occurs.
SLOW: Slow Roll-off Filter Enable
0: Sharp Roll-off Filter
1: Slow Roll-off Filter
MS1127-E-01
- 21 -
2011/03