AKD4705A-A Datasheet, PDF (16/34 Pages) Asahi Kasei Microsystems – AK4705A Evaluation Board Rev.0

[AKD4705A-A]
6-1. [OPEN] buttons on left side and [START] buttons
(1) Click [OPEN] button and select the sequence file (*.aks) saved by [Function3].
The sequence file name is displayed as shown in Figure 3. ( In case that the selected sequence file name is
“DAC_Stereo_ON.aks”)
Figure 5. [F4] window (2)
(2) Click [START] button, then the sequence is executed.
6-2. [SAVE] and [OPEN] buttons on right side
[SAVE] : The name assign of sequence file displayed on [Function4] window can be saved to the file. The file name is
“*.ak4”.
[OPEN] : The name assign of sequence file(*.ak4) saved by [SAVE] is loaded.
6-3. Note
(1) This function doesn't support the pause function of sequence function.
(2) All files used by [SAVE] and [OPEN] function on right side need to be in the same folder.
(3) When the sequence is changed in [Function3], the sequence file (*.aks) should be loaded again in order to reflect the
change.
<KM091000>
- 16 -
2007/09