|
AK4643 Datasheet, PDF (103/104 Pages) Asahi Kasei Microsystems – Stereo CODEC with MIC/HP/RCV/SPK-AMP | |||
|
◁ |
ASAHI KASEI
MARKING
[AK4643]
AKM
AK4643
XXXXX
1
XXXXX : Date code identifier (5 digits)
Revision History
Date (YY/MM/DD)
06/04/04
06/10/24
Revision
00
01
Reason
First Edition
Spec change
Page Contents
38 MIC/LINE Input Selector
âWhen full-differential input is used, the signal
should not be input to the pins marked by âXâ in
Table 21.â was added.
Table 21 (Handling of MIC/Line Input Pins) was added.
Error correct 57
69
79
Stereo Line Output Control Sequence
Power-down mode:
PMLO bit = â1â Ã PMLO bit = â0â
I2C Bus Control Mode
âthose most significant 3-bits are fixed to zerosâ
à âthose most significant 2-bits are fixed to zerosâ
Register Definitions (Addr=0FH)
HPM bit: âWhen the HPM bit = â1â, (L+R)/2 signals
are output to Lch and Rch of the Headphone-Amp.
Both PMHPL and PMHPR bits should be â1â when
HPM bit is â1â.
à âWhen the HPM bit = â1â, DAC output signal is
output to Lch and Rch of the Headphone-Amp as
(L+R)/2.â
92 Control Sequence (Clock Setup: Ext Slave Mode)
MCLK Frequency: 1024fs à 256fs
Addr=05H: Data=01H Ã 00H
93 Control Sequence (Clock Setup: Ext Master Mode)
MCLK Frequency: 1024fs à 256fs
Addr=05H: Data=01H Ã 00H
94 Control Sequence (Mic Recording)
ALC Setting: âRefer to Figure 23â Ã âRefer to Table
36â
MS0476-E-01
- 103 -
2006/10
|
▷ |