AKD4563A Datasheet, PDF (1/26 Pages) Asahi Kasei Microsystems – Evaluation board Rev.A for AK4563A

ASAHI KASEI
[AKD4563A]
AKD4563A
Evaluation board Rev.A for AK4563A
GENERAL DESCRIPTION
AKD4563A is an evaluation board for the 16bit 4ch A/D and 2ch D/A converter, AK4563A. The
AKD4563A can evaluate A/D converter D/A converter separately in addition to loopback mode (A/D →
D/A). The A/D section can be evaluated by interfacing with AKM’s DAC evaluation boards directly. The
AKD4563A has the interface with AKM’s wave generator using ROM data and AKM’s ADC evaluation
boards. Therefore, it’s easy to evaluate the D/A section. The AKD4563A also has the digital audio
interface and can achieve the interface with digital audio systems via opt-connector.
„ Ordering guide
AKD4563A
--- Evaluation board for AK4563A
(Cable for connecting with printer port of IBM-AT,
compatible PC and control software are packed with this.)
FUNCTION
• Compatible with 2 types of interface
- Direct interface with AKM’s A/D & D/A converter evaluation boards
- DIT/DIR with optical input/output
• BNC connector for an external clock input
• 10pin Header for serial control mode
VA GND VT
LIN
RIN
LOUT
ROUT
JP13
JP14
AK4563A
CS8412
(DIR)
AK4353
(DIT)
Opt In
Opt Out
Control
Data
10pin Header
Clock
Generator
A/D, D/A Data
ROM Data
10pin Header
Figure 1. AKD4563A Block Diagram
* Circuit diagram and PCB layout are attached at the end of this manual.
<KM064400>
-1-
’00/12