APT15GP60BDF1 Datasheet, PDF (2/9 Pages) Advanced Power Technology – POWER MOS 7 IGBT

DYNAMIC CHARACTERISTICS
APT15GP¹ 60BDF1
Symbol Characteristic
Test Conditions
MIN
C_ies Input Capacitance
Capacitance
C_oes Output Capacitance
V_GE = 0V, V_CE = 25V
C_res Reverse Transfer Capacitance
f = 1 MHz
V_GEP Gate-to-Emitter Plateau Voltage
Gate Charge
Q_g
Total Gate Charge ³
Q_ge Gate-Emitter Charge
Q_gc Gate-Collector ("Miller ") Charge
V_GE = 15V
V_CE = 300V
I_C = 15A
SSOA Switching Safe Operating Area
T_J = 150°C, R_G = 5Ω, V_GE = 65
15V, L = 100µH,V_CE = 600V
t_d(on)
t_r
t_d(off)
t_f
E_on1
E_on2
Turn-on Delay Time
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ⁴
Turn-on Switching Energy (Diode) ⁵
Inductive Switching (25°C)
V_CC = 400V
V_GE = 15V
I_C = 15A
R_G = 5Ω
T_J = +25°C
E_off
Turn-off Switching Energy ⁶
t_d(on)
t_r
t_d(off)
t_f
E_on1
E_on2
Turn-on Delay Time
Current Rise Time
Turn-off Delay Time
Current Fall Time
Turn-on Switching Energy ^{4 4}
Turn-on Switching Energy (Diode) ⁵⁵
Inductive Switching (125°C)
V_CC = 400V
V_GE = 15V
I_C = 15A
R_G = 5Ω
T_J = +125°C
E_off
Turn-off Switching Energy ⁶⁶
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol Characteristic
MIN
R_ΘJC
R_ΘJC
W_T
Junction to Case (IGBT)
Junction to Case (DIODE)
Package Weight
TYP
1685
210
15
7.5
55
12
15
MAX
UNIT
pF
V
nC
A
8
12
ns
29
58
130
152
µJ
121
8
12
ns
69
88
130
267
µJ
268
TYP MAX UNIT
.50
°C/W
1.31
5.90 gm
1 Repetitive Rating: Pulse width limited by maximum junction temperature.
2 For Combi devices, I_ces includes both IGBT and FRED leakages
3 See MIL-STD-750 Method 3471.
4 E_on1 is the clamped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current
adding to the IGBT turn-on loss. (See Figure 24.)
5 E_on2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching
loss. A Combi device is used for the clamping diode as shown in the E_on2 test circuit. (See Figures 21, 22.)
6 E_off is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.)
APT Reserves the right to change, without notice, the specifications and information contained herein.