EVAL-AD7405FMCZ Datasheet, PDF (5/20 Pages) Analog Devices – Full featured evaluation board

EVAL-AD7405FMCZ User Guide
Installing the EVAL-SDP-CH1Z System Demonstration
Platform Board Drivers
After the installation of the evaluation board software is complete,
the ADI SDP Drivers Setup Wizard window opens for the
installation of the EVAL-SDP-CH1Z system demonstration
platform board drivers (see Figure 7).
1. Make sure that all other applications are closed, and then
click Next to begin the driver installation process (see
Figure 7).
UG-690
3. Click Install to proceed with the installation (see Figure 9).
Figure 9. EVAL-SDP-CH1Z Drivers Installation—Windows Security
4. To complete the drivers installation, click Finish, which
closes the installation wizard (see Figure 10).
Figure 7. EVAL-SDP-CH1Z Drivers Installation—Setup Wizard
2. Select the location to install the drivers, and then click Install
(see Figure 8).
Figure 10. EVAL-SDP-CH1Z Drivers Installation—Complete
Figure 8. EVAL-SDP-CH1Z Drivers Installation—Choose Install Location
Rev. 0 | Page 5 of 20